Takeoff properties: overrides, waste, multiplier, slope and label
Select takeoffs to see and edit their own values in Properties, one at a time or as a batch. Reset to item clears the overrides.
Properties is docked under the job tree on the right of Takeoff. Click its title to fold it away or open it.
Nothing selected
Properties shows the held (or selected) item's values, read-only, with its quantity, cost and parts. Click Edit item… to change the item. See The item editor.
Takeoffs selected
Select one or more takeoffs (click, Shift-click, or drag a box). Properties shows their own values:
- Item and Folder: where they belong. Change… moves them to another item, and Move ▸ to another folder.
- The item's properties marked per takeoff, such as a wall's height. An overridden value is marked, and the item's value shows beside it.
- Waste: this takeoff's own waste, in place of the item's.
- Multiplier: for example 2 for both sides of a wall, or 4 for four identical floors.
- Slope: a pitch like 4:12, or degrees like 18.4°. Lengths and areas on a slope are measured along it.
- Label: a name for this takeoff, shown in the job tree.
- Quantity and With waste: this selection's total, next to the item's.
Batch edit
With several takeoffs selected, Properties shows Batch. A value they don't share reads "(number) values"; hover to see them. Type in a cell to set it on all of them. The whole edit is one undo step.
Reset to item
Reset to item clears the selected takeoffs' overrides and their own waste, so they follow the item again.
Item values or takeoff values
- Change a value here: only the selected takeoffs change.
- Change it on the item: every takeoff that hasn't overridden it changes. See Item properties and look.
Only properties the item marks Per takeoff can be set here. Mark them in the item editor.
Something here doesn't match what you see in the app? Tell us at support@kredna.com.