Set and check the scale
One Scale button: use the scale printed on the sheet, pick a standard scale, calibrate from a known length, add regions for mixed scales, and check against a dimension.
A sheet needs a scale before its lengths and areas mean anything. Until it has one, they read "—", never 0.
Open the scale
Any of these opens the same scale popover for the open sheet:
- The scale button in the ribbon's Scale group. It shows the scale, or "set it" in orange when there is none.
- Set scale on the banner of a sheet with no scale.
- The scale chip in the status bar (or No scale).
- The S key, or right-click the drawing and choose Set scale….
Use the printed scale
If Kredna found a scale printed on the sheet, the popover's first line says Printed on this sheet: with a button to use it.
Pick a standard scale
Click one in the grid: Architectural (1/4" = 1'-0" and the rest), Engineering and Metric. For any other ratio, click Other…, type it (for example 75 for 1:75) and click Use.
Calibrate from a known length
- Click Calibrate in the ribbon, or Calibrate from a known length in the popover.
- Click both ends of a dimension you know.
- Type its real length, such as 24'-6", and press Enter.
Esc cancels.
Check the scale
Check a sheet against a printed dimension before you trust it.
- Click Check in the ribbon, or press K.
- Click both ends of a printed dimension.
- Type the dimension and press Enter.
Kredna says "Matches (scale) (within 1%)" or "Off by (percent) from (scale)". If it is off, choose Use the measured scale or Keep it.
Mixed scales on one sheet
A detail drawn at another scale gets a region with its own scale.
- Click Region in the ribbon, or Add a region in the popover.
- Drag a box around the part drawn at the other scale.
- Set the region's scale in the popover, the same way as a sheet's.
Takeoffs inside a region use its scale. The popover lists Regions on this sheet; pick one to change it, or choose Remove this region.
Use the scale on other sheets
With the sheet scaled, choose Use this scale on other sheets…. It lists the other sheets of the same file, with the ones that have no scale ticked. Tick the ones you want and click Set on (number) sheets.
Sheets that don't need a scale
On a cover or note sheet, click Not needed here on the banner to hide it for that sheet.
Unscaled takeoffs
A takeoff on a sheet or region with no scale has an unknown quantity. It reads "—", is left out of totals, and its parts are listed as Not priced ("Unscaled takeoff"). The status bar and the job tree show "(number) unscaled"; click it in the job tree to select them. Set the scale and they count.
Clear the scale in the popover removes a scale. Quantities on that sheet read "—" until it is set again.
Something here doesn't match what you see in the app? Tell us at support@kredna.com.