Painting estimating software

Price more painting work. Know what each coat costs.

The finish schedule says what gets painted. The plans say how much. The specifications say how many coats.

Take off the surfaces in Kredna and the gallons, sundries and labor come from each item's coats and spread rates. The painting starter pack is included to start from.

22'-0"
PT-1 walls at 9'-0"325 LF
PT-3 ceilings2,460 SF
HM doors and frames38 EA

Illustration on a made-up plan.

What a painting takeoff covers.

Walls go in as areas or as runs with a height, ceilings as areas, doors and frames by count, and trim and pipe by length. Each item works out its painted area from that.

What you take offHowCarried in
Walls by area
New gypsum board, repaint, or concrete masonry with block filler.
AreaSF
Walls by length
Length × height × sides painted; openings are not taken out.
LinearLF, SF
Gypsum board ceilings and soffitsAreaSF
Exposed structure and deck
The floor area below times a surface factor you set, sprayed with dryfall.
AreaSF
Doors and frames
A painted area for each door, frame, or door and frame together.
CountEA
Base, casing and trim
Length × the painted width gives the area.
LinearLF
Metal handrail, exposed pipe and conduitLinearLF
Exterior siding, stucco, masonry, trim and doors
From the building elevations; trim by length and doors by count.
AreaSF
Caulk, floor protection
Caulk by the foot, protection by the floor area.
LinearLF, SF
Lift rental, touch-up
Lift days typed; touch-up as an allowance of hours.
TypedDAY, EA

Gallons from area, coats and spread rate.

Each painted item has primer and finish paint parts: the painted area × the coats, over the spread rate, in gallons. Sundries go by the area painted, and Prep, Prime and Finish labor follow the area and the coats.

The coats and spread rates are properties on the item. The spread rates start at a typical label coverage; set your products' own. Change the coats and the gallons follow.

The item editor over the drawing: the item's properties and its parts, each quantity a formula

Rooms from the finish schedule.

Read the room finish schedule, then take off each room's walls and ceilings with the item for its finish: walls by length with their height, or by area, and ceilings with click fill inside the room. Doors and frames are counted from the door tags.

Accent walls, exposed structure and exterior faces get their own items, so each is priced on its own.

One finish at several heights.

A selected takeoff can override the item's height, so rooms at 9', 9'-6" and 10' price apart on the same finish. Put the job in folders by floor, or by interior and exterior, and mark a folder as an alternate.

Labor sits in three labor categories, Prep, Prime and Finish. Enter your own production rates, total hours or crew durations; none ship.

Pricing: the job tree as a grid with material, labor and totals, and the recap on the right

Doors, frames and trim by count and length.

Count flush doors, hollow metal frames, or a door and frame as one, each with its painted area. Base, casing and trim go in by length with their painted width, and caulk by the foot.

A painting proposal the GC can read.

The pack includes painting inclusions, exclusions and clarifications to start your company list: primer and two finish coats on new gypsum board, two finish coats on factory-primed hollow metal, and wall coverings, special coatings, prefinished items and drywall patching beyond minor prep left out unless listed.

Edit them once and they are yours on every painting bid. The proposal goes out as PDF or Word, with its amounts read from Pricing.

What the painting starter pack includes.

The painting starter pack is included basics: install it from the library's Import pack and it becomes company content you can edit. It ships with no prices and no production rates, so every material part shows as Missing until you price it.

  • Walls: new gypsum board, repaint, walls by length with a height, and concrete masonry with block filler
  • Ceilings: gypsum board, and exposed structure and deck with dryfall
  • Doors and frames: flush door, hollow metal frame, door and frame together, and window or sidelight frame
  • Trim: wood base, casing and trim, metal handrail and guardrail, and exposed pipe and conduit
  • Exterior: siding and panels, stucco and masonry, trim and fascia, and door and frame
  • Preparation and job items: caulk, floor protection, lift rental and touch-up
  • Labor categories Prep, Prime and Finish
  • Tags for interior and exterior primer and finish paint, door and trim enamel, block filler and dryfall, with no values set
  • Painting inclusions, exclusions and clarifications
  • The scope assistant's setup for painting: what to look for, the disciplines and spec sections to read, what is usually by others, and the checks

The prices are yours to set. A part without a price shows as Missing, never as zero, and every total that includes it is marked incomplete until you price it.

The library: folders of items and assemblies, each with its parts

Painting scope that is usually someone else's.

The pack's assistant setup reads the architectural and interiors sheets and the painting spec sections for the room finish schedule, paint systems and coats, field-painted doors and frames, exposed structure, exterior surfaces and accent walls. It highlights each place on the sheet for you to jump to, checks for things like a room the finish schedule doesn't list, and flags lines like these as usually another trade's. Findings stay drafts until you accept them.

  • Wall coverings
  • Intumescent and fireproofing coatings
  • Factory finishes on doors, casework and equipment
  • Floor coatings and sealers
  • Drywall finishing

AI findings need estimator review. Check quantities, costs and scope against the project documents before submitting a bid.

Moving from another takeoff tool?

Pick an item, measure on the sheet and watch the quantity total in the job tree. Build your items once in the library, and the takeoff, pricing and proposal all read the same job.

Painting questions

Does Kredna work out gallons of paint?
Yes. Each painted item's primer and finish parts are the painted area × the coats, over the spread rate. The spread rates start at a typical label coverage; set the ones for the products you use.
Can I price painting by the square foot?
Yes. Sundries carry by the SF painted, and Pricing shows each item's quantity in its unit beside its cost, with the cost per unit by folder.
Can I take off wall coverings?
The pack lists wall coverings as an exclusion unless listed. If you install them, build an item for them by the linear yard or by area, with adhesive as a part.
Does the pack come with prices?
No. The pack sets no prices and no production rates. Every material part shows as Missing, never as zero, until you price it, and the tags have no values until you set them.
Does the AI do the painting takeoff?
No. The scope assistant reads the documents for painting scope, highlights where it is and flags conflicts and what is usually another trade's. It never measures, counts or prices. The takeoff and the number are yours.

Bring a finish schedule you know.

See how the rooms, the coats, the labor and the proposal fit together on work your company bids.