Area takeoff
Draw areas corner by corner, cut holes with Alt, or click inside a room to fill it with Click fill.
Use Area (A) for floors, ceilings, wall faces and anything measured by area.
Draw an area
- Hold an area item. Area is chosen for you.
- Click each corner.
- Press Enter, or double-click, to close the area.
Lengths can be typed for each side, as on a linear run. See Type exact lengths and angles.
Cut a hole
- With Area in hand, hold Alt and click inside an existing area to start the hole.
- Click the hole's corners and press Enter.
The hole is taken out of that area's quantity. The cursor label says "Cutting a hole" while you draw it.
Click fill
Click fill (F) fills a room for you.
- Hold an area item and click Click fill.
- Click inside a room that the drawing's lines close all the way around.
If the lines don't close the room, Kredna says so; draw it with Area instead.
Rectangles and circles
Shapes ▾ › Rectangle takes two corners. Shapes ▾ › Circle takes the center, then a point on the edge (or a typed radius). See Shape tools and the tape measure.
Combine and split areas
Select two or more overlapping areas of the same item and choose Shape ▾ › Union areas. To split one, select it, choose Shape ▾ › Split…, and draw the cut line across it.
Something here doesn't match what you see in the app? Tell us at support@kredna.com.