Shape tools and the tape measure

Segment, Rectangle, Circle and Arc for quick exact shapes, and the Tape to measure without storing anything.

Open Shapes ▾ in the ribbon's Draw group.

Segment

A single straight piece from one point to another. Click the start, then the end. You can type its length after the first click.

Rectangle

Click two opposite corners. For an area item it measures the area; for a length item it measures the length around it.

Circle

Click the center, then a point on the edge, or type the radius after the first click. Like a rectangle, it measures area for an area item and the length around for a length item.

Arc

For a length item. Click the start, a point on the arc, then the end.

Each shape draws the held item, like every other tool.

The tape measure

Tape (M) in the ribbon's Scale group measures between two points. Nothing is stored.

  1. Click Tape or press M.
  2. Click two points. The status bar shows the distance ("Tape 18'-4"").
  3. Click again to start a new measurement. Esc puts the tape down.

The sheet needs a scale for the tape to read a length. See Set and check the scale.

Something here doesn't match what you see in the app? Tell us at support@kredna.com.